CIMR-PCD20P1
Call Today!
|
||
CIMR-PCD20P1 Information: |
CALL TODAY FOR QUOTE! Input AC 3PH 200-230V 50/60Hz 0.9A Output 3PH 0-230V 0-400HZ. Main circuit input/output (1) Phase rotation of input terminals Ll, L2, L3 is available in either direction, clockwise or counterclockwise. (2) When inverter output terminals T1, T2, and T3 are
connected to motor terminals T1, T2, and T3, respectively, motor rotates counterclockwise, when
viewed from opposite drive end, upon forward run command. To reverse the .rotation, interchange any
two of the motor leads. (3) Never connect AC main circuit power supply to output terminals T1, T2, or T3 . Inverter may be damaged. (4) Care should be taken to prevent contact of wiring leads with the VS-606PG3 cabinet, for a ground fault or a short-circuit may result. (5) Insert an L noise filter to the VS-606PG3 output, but never connect power factor correction capacitor, LC or RC to VS-606PG3 output. (6) Be sure to tighten the main circuit terminal screws. (7) Be sure to separate the main circuit wiring from inverter and peripheral device control lines. Otherwise, it may cause the devices to malfunction